Sony MLS-X1 Users Guide - Page 431
Setting a Disk Recorder Odetics, Setting an AMP Compatible Device
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
3 Enable/disable recueing using the [Recue] button. On: Enable recueing. After playing the loaded file, recue the beginning and then stop. Off: Disable recueing. Setting a Disk Recorder (Odetics) 1 Open the Home > Setup > External Device > Serial/ Net Port Setting > DDR Odetics menu (19105.64). A list of ports is shown on the left and the settings status of the selected port is shown on the right. 2 In the list on the left, select the target port to set. 3 In the [TC Sense] group, select a timecode sense mode. Zero based: Timecode sense (detection), taking the first frame of the loaded file as 00:00:00:00. SOM based: Sense (detection) occurs using the timecode recorded in the loaded file. 4 In the list on the right, set the response speed of the item. Press the [Setting] button for an item to set and enter a setting in the numeric keypad window. Item Item description Maximum Open Delay Maximum time required to open a file Maximum Maximum time required to cueup a Cueup Delay file Play After Delay time after cueup until playback Cueup Delay starts Stop Delay Delay time from issuing the Stop command until playback stops Still Delay Delay time from issuing the Still command until playback stops Command Delay (Auto Mode) Delay time from issuing the Auto Mode On/Off command until the command takes effect Command Delay (Out Preset) Delay time from issuing the Out Preset command until the command takes effect Command Delay time from issuing the Preview Delay (Preview In Preset command until the In Preset) command takes effect Internal Reserved for future use. Parameter (1) Set the value to "255". to (4) Setting an AMP Compatible Device 1 Open the Home > Setup > External Device > Serial/ Net Port Setting > AMP menu (19105.65). A list of ports is shown on the left and the settings status of the selected port is shown on the right. 2 In the list on the left, select the target port to set. 3 Press the [IP Address] button and enter an IP address using the keyboard. 4 Press the [TCP/IP Port] button and enter a port number in the numeric keypad window. 5 In the [TC Sense] group, select a timecode sense mode. Zero based: Timecode sense (detection), taking the first frame of the loaded file as 00:00:00:00. SOM based: Sense (detection) occurs using the timecode recorded in the loaded file. 6 In the list on the right, set the video port and response speed of the item. Press the [Setting] button for an item to set and enter a setting in the numeric keypad window. Item Item description Video Port Number of the video port (1 to 4) associated with the target port to set Maximum Open Delay Maximum time required to open a file Maximum Maximum time required to cueup a Cueup Delay file Play After Delay time after cueup until playback Cueup Delay starts Stop Delay Delay time from issuing the Stop command until playback stops Still Delay Delay time from issuing the Still command until playback stops Command Delay (Auto Mode) Delay time from issuing the Auto Mode On/Off command until the command takes effect Command Delay (Out Preset) Delay time from issuing the Out Preset command until the command takes effect Command Delay time from issuing the Preview Delay (Preview In Preset command until the In Preset) command takes effect Internal Reserved for future use. Parameter (1) Set the value to "255". to (3) 431