Sony MLS-X1 Users Guide - Page 401
Inhibiting Switcher Bank Operation, Inhibiting Key Operation, Setting Dual M/E
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
Inhibiting Switcher Bank Operation You can inhibit operation of switcher bank assigned to an M/E bank. 1 Open the Home > Setup > Panel > Config > M/E / AUX Assign menu (19104.11). 2 Select the target switcher bank to set. 3 Press the [Operation] button and select an inhibit operation setting from the pull-down list. Enable: Enable panel display and operation of the switcher bank. Disable: Enable panel display only, and inhibit operation of the switcher bank. Inhibit: Turn off panel display and inhibit operation of the switcher bank. Note When selecting a region from the taskbar, switcher banks with operation inhibited cannot be selected. Inhibiting Key Operation You can inhibit operation of key 1 to key 8 on each switcher bank assigned to an M/E bank. Key operations on the following control blocks can be inhibited. • Cross-point control block • Transition control block • Independent key transition control block • Flexi Pad control block 1 Open the Home > Setup > Panel > Config > M/E / AUX Assign menu (19104.11). The status of the key inhibit settings are displayed in [Key Inhibit]. Keys with an inhibit setting are displayed in white characters. In multi program 2 mode, the status of main and sub keys is displayed. 2 Select the target switcher bank to set. 3 Press the [Edit] button for [Key Inhibit]. The [Key Inhibit] window appears. 4 Place a check mark in the keys to inhibit operation. 5 Press [OK]. Setting Dual M/E You can assign the cross-points for the shifted state and unshifted state of a single switcher bank to two consecutive M/E banks. Dual M/E is set for the M/E bank with the lowest number from among the two M/E banks. Notes • Cannot be set if there is only one M/E bank row. • Cannot be set if a switcher bank has not been assigned to the M/E bank. • Cannot be set on an M/E bank that precedes a row assigned with an AUX bank. 1 Open the Home > Setup > Panel > Config > M/E / AUX Assign menu (19104.11). 2 Select the target switcher bank to set. 3 Press the [Assign] button for [Dual M/E]. The switcher bank with the lower M/E bank number is set to the shifted state, and the switcher bank with the higher M/E bank number is set to the unshifted state. To release the dual M/E setting Assign a switcher bank to an M/E bank. For details, see "Assigning a Switcher Bank/AUX" (page 400). Swapping shifted and unshifted assignments 1 Open the Home > Setup > Panel > Config > M/E / AUX Assign menu (19104.11). 2 Press the [Dual M/E Xpt Swap] button. On: Set the M/E bank with the higher number to the unshifted state, and the M/E bank with the lower number to the shifted state. Off: Set the M/E bank with the higher number to the shifted state, and the M/E bank with the lower number to the unshifted state. 401