Sony MLS-X1 Users Guide - Page 254

j Pause Displayed when a pause is set. k Stop point timecode l Effect duration m Current keyframe number/number of keyframes n Current timecode o Cursor Displays the position of the current timecode. p Keyframes Displays the positions where a keyframe has been inserted. When there are multiple keyframes, the number of keyframes set at the same position is displayed. Setting the Effect Timeline List View Setting the display order of regions The timeline list displays both the regions selected as the operation target and then the regions that are not selected in their set order of priority. 1 Open the Home > Register > Effect Timeline > Timeline View > Assign menu (18301.12). The order of priority is shown in the list on the left, and the regions that can be selected are shown in the list on the right. 2 In the list on the left, select the order of priority position. 3 In the list on the right, select a region for insertion. 4 Press the [Assign] button. The selected region is inserted and the order of priority of subsequent regions are shifted down by one. If a region configured in the list is the same as the selected region, the order of priority is updated. To display in the configured order of priority regardless of the target selection Set the [Auto-Assign Active Rgn] button to the off state. Setting the display of regions on or off You can select the regions shown in the timeline list. 1 Open the Home > Register > Effect Timeline > Timeline View > Assign menu (18301.12). "Enabled" is displayed for [Display] in the list on the left for regions set for display. 2 In the list on the left, select the target region to set. 3 Set whether to display/hide the region using the [Display] button. On: Display the region in the timeline list. Off: Do not display the region in the timeline list. Returning the region view to the initial settings 1 Open the Home > Register > Effect Timeline > Timeline View > Assign menu (18301.12). 2 Press the [Default Recall] button. 254