Sony MLS-X1 Users Guide - Page 301

To enable auto run Press the [Auto Run On] button. To disable auto run Press the [Auto Run Off] button. Editing a Shotbox Register You can copy, move, and swap register data. You can also rename, lock, and delete a register. Copying a register Notes • An empty register cannot be copied. • A locked register cannot be copied. 1 Open the Home > Register > Shotbox > Edit Register > Copy/Move/Swap menu (18306.22). A list of copy source registers is shown on the left, and a list of copy destination registers is shown on the right. 2 In the list on the left, select a copy source register. To select and copy multiple registers, place a check mark beside the target registers to copy. To select and copy all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 3 In the list on the right, select a copy destination register. When multiple registers are selected, select the first copy destination register. You can also press the [Select Destination] button and enter a register number in the numeric keypad window. The copy destination of the first register selected on the left is the first register selected on the right, and the subsequent registers on the right in the same relative positions as the selected registers on the left become copy destinations. The first register on the right is shown in light blue, and the subsequent copy destination registers are shown in blue gray. 4 Press the [Copy] button. 5 Check the message, then press [OK]. To search for a register Press the [Search] button, enter a character string to search for in the input field in the displayed window, and press the [Enter] button. Only registers containing the entered character string are displayed. To copy without renaming a destination register Set the [w/o Name] button to the on state. Moving a register Notes • An empty register cannot be moved. • A locked register cannot be moved. Select a move source register and move destination register in the same way as for copying a register and press the [Move] button. For details, see "Copying a register" (page 301). To move without renaming a destination register Set the [w/o Name] button to the on state. Swapping registers Select the registers to swap in the same way as for copying a register and press the [Swap] button. For details, see "Copying a register" (page 301). To swap without renaming the registers Set the [w/o Name] button to the on state. Locking a register 1 Open the Home > Register > Shotbox > Edit Register > Browse menu (18306.21). 2 Select the target register to lock. To select and lock multiple registers, place a check mark beside the target registers to lock. To select and lock all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 3 Press the [Lock] button. To release the lock Select the target register to unlock and press the [Unlock] button. 301