Sony MLS-X1 Users Guide - Page 130
Setting Key Edges Key Control, Block, To swap color 1 and color 2 in a color mix
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
2 Set the [Mix Color] button in the [Edge Matte] group to the on state and set the following parameters. No. Parameter 1 Size 2 Soft 5 Pattern Adjustment Pattern size Softness of the pattern contour Pattern number a) a) Linked to the pattern number selected using the [Mix Pattern Select] button. To set a single color, set the [Flat Color] button to the on state. Note The [Flat Color] button parameters are shared with the [Matte] button parameters in the [Edge Fill] group in the Home > M/E-1 > Key1 > Edge > Edge Type Select menu (11101.21). 3 Press the [Mix Pattern Select] button. A pattern selection window appears. Note Dedicated patterns 1 to 24 are the same as standard wipe patterns 1 to 24. 4 Set the button for the target pattern to the on state. 5 Press [OK]. 6 Press the [Color 1] button and set color 1 using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue Note The [Color 1] button parameters are shared with the [Matte] button parameters in the [Edge Fill] group in the Home > M/E-1 > Key1 > Edge > Edge Type Select menu (11101.21). 7 Press the [Color 2] button and set color 2 using the following parameters. No. Parameter 1 Luminance 2 Saturation Adjustment Luminance Saturation No. Parameter 3 Hue Adjustment Hue To swap color 1 and color 2 in a color mix Set the [Color Invert] button to the on state. To set modifiers for a dedicated pattern for a color mix You can set the following modifiers. Position: Set the [Position] button to the on state and set the parameters. For details about setting parameters, see "Setting the wipe pattern position (Position)" (page 158). Multiplication: Set the [Multi] button to the on state and set the parameters. For details about setting parameters, see "Replicating a wipe pattern (Multi)" (page 159). Aspect: Set the [Aspect] button to the on state and set the parameters. For details about setting parameters, see "Setting the aspect ratio of a wipe pattern (Aspect)" (page 159). Rotation (angle): Set the [Angle] button in the [Rotation] group to the on state and set the parameters. For details about setting parameters, see "Rotating a wipe pattern (Rotation)" (page 158). Rotation (speed): Set the [Speed] button in the [Rotation] group to the on state and set the parameters. For details about setting parameters, see "Rotating a wipe pattern (Rotation)" (page 158). Setting Key Edges (Key Control Block) Select the target key to set and press the page selection button to display page 2/3 of the setting buttons. In the key control block, you can set the edge type using the following buttons. • [BDR] button: Border • [DROP BDR] button: Drop border • [SHDW] button: Shadow • [SOFT EDGE] button: Soft edge For details about key control block operations, see "Setting the Key Type (Key Control Block)" (page 119). 130