Sony MLS-X1 Users Guide - Page 419
Setting the Mode of Buttons in the, Cross-Point Control Block, Flexi Pad Control Block
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 419 highlights
Blink: The transition indicator flashes when in nonsync state. Setting the main fader lever when using split faders When using the fader lever in the simple-type transition control block as split faders, you can set which is the main fader lever (right or left). The main fader lever controls the background A bus. If the conditions for using split faders are not satisfied, only the main fader lever can be operated. 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Main Split Fader] group, select the main fader lever. Left: Set the left fader lever as the main fader lever. Right: Set the right fader lever as the main fader lever. Setting the Mode of Buttons in the Cross-Point Control Block Setting the operation mode of the [UTIL] button in the cross-point control block 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Util Button] group, select an operation mode. Hold: Enables utility bus mode only while the [UTIL] button is pressed. Lock: Pressing the [UTIL] button switches between utility bus mode and normal mode each time the button is pressed. Setting the operation mode of the [KEY] button in the cross-point control block You can set the signal to select on the key source bus. 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Key Source Bus Select Mode] group, select an operation mode. Key: The [KEY] button is always lit and only key signals can be selected. Video & Key: Enables key signals or video signals to be selected using the [KEY] button operation. Setting the Mode of Buttons in the Flexi Pad Control Block Setting the button display in wipe snapshot operation mode/DME wipe snapshot operation mode You can set the memory recall button display in wipe snapshot operation mode/DME wipe snapshot operation mode. 1 Open the Home > Setup > Panel > Custom > Flexi Pad Mode menu (19104.62). 2 In the [Wipe/DME Display] group, select a button display. Pattern: Display pattern image. Register Name: Display register name. Setting the button display in snapshot operation mode You can set the memory recall button display in snapshot operation mode. 1 Open the Home > Setup > Panel > Custom > Flexi Pad Mode menu (19104.62). 2 In the [Snapshot Display] group, select a button display. Register No.: Display register number. Register Name: Display register name. Assigning a register to bottom left button of bank 0 You can assign a register to the bottom left memory recall button when bank 0 is selected in snapshot operation mode/shotbox operation mode/macro operation mode. 1 Open the Home > Setup > Panel > Custom > Flexi Pad Mode menu (19104.62). 2 Set the [Activate] button in the [Bank 0 Register Assign] group to the on state. 3 Press the [Register No.] button in the [Bank 0 Register Assign] group and enter a register number in the numeric keypad window. To release the register assignment Set the [Activate] button in the [Bank 0 Register Assign] group to the off state. 419