Sony MLS-X1 Users Guide - Page 115
Fade-to-Black, Setting Fade-to-Black
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Fade-to-Black This function gradually darkens the image and changes the P/P program output image to black. Note When the switcher bank operation mode is multi-program mode, multi program 2 mode, or DSK mode, fade-toblack is executed for multiple program outputs simultaneously. You can also disable fade-to-black for each program output. For details, see "Enabling/Disabling Fade-To-Black" (page 395). Setting Fade-to-Black Assigning a utility command To execute fade-to-black, the "Fade To Black" utility command must be assigned to the following buttons beforehand. • Memory recall buttons in the utility/shotbox control block • Memory recall buttons in the utility control block • Cross-point buttons in the cross-point control block For details about assigning a utility command, see "Assigning a utility command" (page 405). Setting the transition rate 1 Open the Home > P/P > Bus/Transition > Transition > Transition Type menu (11909.21). 2 Press the [FTB] button and enter a transition rate in the numeric keypad window. To set the transition rate in list view You can set the fade-to-black transition rate in transition rate list view on each switcher bank. 1 Open the Home > Utility > Transition Rate menu (18201.21). 2 Press the [FTB] button and enter a transition rate in the numeric keypad window. Executing Fade-to-Black This section describes operation using a memory recall button ([FTB] button) in the utility/shotbox control block or utility control block assigned with the "Fade To Black" utility command. 1 Select a bank. For details about selecting a bank in the utility/ shotbox control block, see "Selecting a bank" (page 233). In the utility control block, press the [UTIL/SBOX] button to switch the memory recall section to utility/ shotbox operation mode and select a bank. For details about selecting a bank in the utility control block, see "Selecting a bank" (page 234). 2 Press the [FTB] button. This executes fade-to-black with the preset transition rate. During the transition execution, the [FTB] button is lit light purple. When the transition is completed, the image becomes black and the [FTB] button color changes to red. 115