Sony MLS-X1 Users Guide - Page 365
Setting the Reference Signal, Setting the Image Switch Timing
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
To return to the previous setting Press the [Clear] button. 6 Check the message, then press [OK]. The switcher system reboots. Setting the Reference Signal You can set the input/output reference signal to HD trilevel sync or black burst. Note In a multiple-box switcher configuration, the reference signal lock mode and input/output reference signals cannot be configured. The reference signal is configured using MLS Manager. Setting the reference signal lock mode 1 Open the Home > Setup > System > Format/Config > Format menu (19101.22). 2 Select the [Settings] tab. 3 In the [Ref Lock Mode] group, select a lock mode. External: External lock mode Sync to input reference signal. Internal: Internal lock mode Use switcher internal signal as the reference signal. 4 Press the [Apply] button in the [Signal Format/ Frequency/Ref] group. To return to the previous setting Press the [Clear] button. 5 Check the message, then press [OK]. The switcher system reboots. Setting the input reference signal Note Cannot be set when the reference signal is in internal lock mode. 1 Open the Home > Setup > System > Format/Config > Format menu (19101.22). 2 Select the [Settings] tab. 3 In the [Ref Input Format] group, select a reference signal. Tri Sync: HD tri-level sync BB: Black burst or sync 4 Press the [Apply] button in the [Signal Format/ Frequency/Ref] group. To return to the previous setting Press the [Clear] button. 5 Check the message, then press [OK]. The switcher system reboots. Setting the output reference signal 1 Open the Home > Setup > System > Format/Config > Format menu (19101.22). 2 Select the [Settings] tab. 3 In the [Ref Output Format] group, select a reference signal. Tri Sync: HD tri-level sync BB: Black burst or sync 4 Press the [Apply] button in the [Signal Format/ Frequency/Ref] group. To return to the previous setting Press the [Clear] button. 5 Check the message, then press [OK]. The switcher system reboots. Setting the Image Switch Timing 1 Open the Home > Setup > System > Format/Config > Format menu (19101.22). 2 Select the [Settings] tab. 3 In the [Switch Timing] group, select the switch timing. Any: Not specified Field1: Field 1 Field2: Field 2 365