Sony MLS-X1 Users Guide - Page 383
Creating a Cross-Point Assign Table, Creating Tables 1 to 14, Setting the Shift Button
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
Creating a Cross-Point Assign Table You can create up to 14 other tables (Table1 to Table14) as cross-point assign tables. You can set logical V/K pairs in a cross-point assign table. Creating Tables 1 to 14 You can assign logical V/K pairs configured in the logical V/K pair name table to cross-point button numbers. 1 Open the Home > Setup > Xpt Assign > Table Button Assign menu (19102.31). 2 Display the target table to set. Select a tab to change the table (Table1 to Table14) to display. 3 Select the target button number to set. To select and set multiple button numbers, place a check mark beside the target button numbers to set. To select and set all button numbers, place a check mark in the Select All checkbox. 4 Press the [Edit] button. The [Select Logical V/K Pair] window appears. 5 Set the button for the logical V/K pair to assign to the on state. Select a tab to change the logical V/K pair to display. 6 Press [OK]. To inhibit operation Select the target button number and set the [Inhibit] switch to the on state. To delete a button number setting Select the target button number to delete and press the [Delete] button. The settings for all the button numbers not deleted move up in sequence. To insert a button number setting Select the button number at the insertion position and press [Insert]. A button number is inserted and the settings of all other buttons are shifted by one. To return to the initial settings Press the [Default Recall] button, check the message, then press [OK]. Setting the Shift Button Setting the [SHIFT] button operation mode You can set the operation mode of the [SHIFT] button assigned to the right edge of the cross-point button row in the cross-point control block/AUX bus control block (AUX bus operation mode). You can set it for each cross-point assign table. Note The [SHIFT] button operation mode is set by the settings of the cross-point assign table of the switcher bank, regardless of the buses assigned to the cross-point button rows. 1 Open the Home > Setup > Xpt Assign > Shift Mode menu (19102.41). 2 Select the target table to set. To select and set multiple tables, place a check mark beside the target tables to set. To select and set all tables, place a check mark in the Select All checkbox. 3 Press the [Xpt Shift Mode] button and select an operation mode from the pull-down list. Hold: Functions as a shift button, and the shifted state of a cross-point button is enabled while the button is pressed. Lock: Functions as a shift button, and pressing a button toggles between the shifted and unshifted states of the cross-point. Off: Functions as a cross-point button. Setting the [SHIFT ALL] button operation mode You can set the operation mode of the [SHIFT ALL] button assigned to the cross-point pad/function button section of the cross-point control block. The setting is common to all cross-point assign tables. 1 Open the Home > Setup > Xpt Assign > Shift Mode menu (19102.41). 2 Set the operation mode using the [Shift All Hold] button. 383