Sony MLS-X1 Users Guide - Page 53

Notes • The [UNDO] button and [DEL] button cannot be used in shotbox operation mode. • The [UNDO] button cannot be used in macro operation mode. Also, the [DEL] button cannot be used in edit mode. Bank selection buttons Function name Bank 0 to Bank 99 Bank Select Button name Description BANK0 to BANK99 BANK SEL The memory recall section switches to the register display for the selected bank. Enter a bank number to switch the memory recall section to the register display for the selected bank. b Memory recall section (memory recall buttons) This section displays the functions assigned to the buttons for the selected operation mode. The top right button is used to display the selected pattern number, register number, macro event number, transition rate input value, and other status display (excluding in key operation mode). When a macro is recalled in macro operation mode, the bottom center button displays the executed event number and the total number of events. Numeric keypad mode Pressing the [BANK SEL] button, [PTN NO.] button, or [PAUSE] button switches the memory recall section to numeric keypad mode, where you can enter bank numbers, wipe pattern numbers, and pause event times. The currently set numeric value or the value entered in numeric keypad mode is displayed on the top right button. Device Control Block The device control block is used for three-dimensional transforms using a DME, two-dimensional transforms using a resizer, executing effect timelines, controlling devices/frame memory/clip players, entering menu parameters, and other functions. a d c b a Mode selection buttons / channel selection buttons (assignable buttons) You can assign mode and channel selection buttons in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). 53