Sony MLS-X1 Users Guide - Page 441
Setting an M/E Link
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
4 Press the [Edit] button. The [Assign V/K Pair] window appears. 5 Set the button for the link destination logical V/K pair number to the on state. Select a tab to change the logical V/K pair number to display. 6 Press [OK]. To return a link table to the initial settings Press the [Initialize Table] button, check the message, then press [OK]. Setting an M/E Link You can link the transition operations between switcher banks. The following operations are linked. • Transition execution (auto transition, cut, and fader lever operation) • Next transition selection • Transition type selection 1 Open the Home > Setup > Link > M/E Link menu (19107.21). 2 Select the target link number to set. To select and set multiple link numbers, place a check mark beside the target link numbers to set. To select and set all link numbers, place a check mark in the Select All checkbox. 3 Enable/disable the link using the [Link Enable] switch. On: Enable link. Off: Disable link. 4 Press the [Controlling M/E] button and select a link source switcher bank from the pull-down list. 5 Press the [Linked M/E] button and select a link destination switcher bank from the pull-down list. 6 Select the operations to link using the [Transition Only] switch. On: Link transition execution only. Off: Link transition execution, next transition selection, and transition type selection. 441