Sony MLS-X1 Users Guide - Page 287
Editing a Snapshot Register, Copying a register
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
The [Edit Auto Play] window appears. 2 Set the button for the target channel to the on state. You can select multiple channels. 3 Press [OK]. To add the cross-point hold (DME) attribute Set the [Xpt Hold] switch to the on state. Editing a Snapshot Register You can copy, move, and swap register data. You can also rename, lock, and delete a register. Copying, moving, and swapping registers between different regions is supported between the following regions. • Between switcher bank regions (M/E-1 to M/E-5, P/P, M/E-1 Sub to M/E-5 Sub, P/P Sub) • Between DME regions (DME 1 to DME 4) Copying a register Notes • An empty register cannot be copied. • A locked register cannot be copied. 1 Open the Home > Register > Snapshot > Edit Register > Copy/Move/Swap menu (18302.13). A list of copy source registers is shown on the left, and a list of copy destination registers is shown on the right. 2 Press the [Select] button in the [Region] group on the left. The [Select Region] window appears. 3 Set the button for the copy source region to the on state. Select a tab to change the region to display. [ME] tab: Switcher bank regions [User] tab: User regions [DME] tab: DME regions [External Device] tab: External device regions 4 Press [OK]. 5 In the list on the left, select a copy source register. To select and copy multiple registers, place a check mark beside the target registers to copy. To select and copy all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 6 Press the [Select] button in the [Region] group on the right. The [Select Region] window appears. 7 Set the button for the copy destination region to the on state. Select a tab to change the region to display. 8 Press [OK]. 9 In the list on the right, select a copy destination register. When multiple registers are selected, select the first copy destination register. You can also press the [Select Destination] button and enter a register number in the numeric keypad window. The copy destination of the first register selected on the left is the first register selected on the right, and the subsequent registers on the right in the same relative positions as the selected registers on the left become copy destinations. The first register on the right is shown in light blue, and the subsequent copy destination registers are shown in blue gray. 10Press the [Copy] button. 11Check the message, then press [OK]. To search for a register Press the [Search] button, enter a character string to search for in the input field in the displayed window, and press the [Enter] button. Only registers containing the entered character string are displayed. To copy without renaming a destination register Set the [w/o Name] button to the on state. Moving a register Notes • An empty register cannot be moved. • A locked register cannot be moved. Select a move source register and move destination register in the same way as for copying a register and press the [Move] button. For details, see "Copying a register" (page 287). 287