Sony MLS-X1 Users Guide - Page 399

[MV/DME/CB] tab: Multi viewer, DME, color background signals [FM/CP] tab: Frame memory and clip player signals [Input] tab: Input signals Note If the same signal is configured for multiple numbers, the setting with the lowest number with the lowest logical box ID becomes enabled. 5 Press [OK]. To return to the previous setting Press the [Clear] button. 5 Check the message, then press [OK]. Setting DME/Frame Memory Channels You can set the DME/frame memory channels to use on each box. When the system signal format is 1080P or 1080i, all boxes use the same channels. Notes • When a DME license (option) is not installed on a target box, DME channels cannot be assigned. • When an SL key is selected in the GPU on a target box, DME channels cannot be assigned. • If a target block does not have an M/E assigned, DME channels cannot be assigned. • The DME channel assignment cannot be changed unless the DME channel 1 and 3 settings are the same in the Home > Setup > System > Format/Config > GPU Config menu (19101.25). • If a frame memory channel is changed, the recall state of all channels is released. • If the frame memory channel is changed, unsaved content will be lost. Save any required content in content storage before making changes. 1 Open the Home > Setup > Switcher > Box Settings > DME/FM Channel Assign menu (19103.53). 2 Select the target [DME Channel] group to set and select the DME channels. DME Ch1 / Ch2: DME channel 1 and channel 2 DME Ch3 / Ch4: DME channel 3 and channel 4 3 Select the target [FM Channel] group to set and select the frame memory channels. FM1 - FM6: Frame memory channel 1 to channel 6 FM7 - FM12: Frame memory channel 7 to channel 12 4 Press the [Apply] button. 399