Sony MLS-X1 Users Guide - Page 43

Name 3rd row 4th row Description • When second delegation mode is enabled, selects the signal for the bus assigned by the 1st row delegation buttons. • When second delegation mode is disabled, selects the signal for the bus assigned by the 1st row or 2nd row delegation buttons. You can select the signal in the shifted state while pressing the shift button. • When second delegation mode is enabled, selects the signal for the bus assigned by the 2nd row delegation buttons. • When second delegation mode is disabled, selects the signal for the bus in the shifted state assigned by the 1st row or 2nd row delegation buttons. Router operation mode Uses the 1st row and 2nd row delegation buttons to select a destination, and the 3rd row and 4th row cross-point buttons to select a source. For details, see "Router Operations (AUX Bus Control Block)" (page 230). Name 1st row 2nd row 3rd row 4th row Description • When second delegation mode is enabled, selects the destination to assign to the 3rd row. • When second delegation mode is disabled, selects the destination (destination in unshifted state of delegation buttons) to assign to the 3rd row and 4th row. You can select the destination in the shifted state while pressing the shift button. • When second delegation mode is enabled, selects the destination to assign to the 4th row. • When second delegation mode is disabled, selects the destination (destination in shifted state of delegation buttons) to assign to the 3rd row and 4th row. • When second delegation mode is enabled, selects the source for the destination assigned by the 1st row delegation buttons. • When second delegation mode is disabled, selects the source for the destination assigned by the 1st row or 2nd row delegation buttons. You can select the source in the shifted state while pressing the shift button. • When second delegation mode is enabled, selects the source for the destination assigned by the 2nd row delegation buttons. • When second delegation mode is disabled, selects the source for the destination in the shifted state assigned by the 1st row or 2nd row delegation buttons. b Display In AUX bus operation mode, the following information is displayed. • Settings of buttons on the 1st row to 4th row (bus name or signal name assigned to the button) • Macro register name of macro attachment assigned to the 1st row to 4th row buttons • Signal name selected by the bus on the 1st row to 2nd row delegation buttons In router operation mode, the following information is displayed. • Settings of buttons on the 1st row to 4th row (destination name or source name assigned to the button) • Source name selected by the destination on the 1st row to 2nd row delegation buttons When the [SHIFT] button function is set, "SHFT" appears on the display. When the shifted state is selected, "SHFT" is displayed highlighted, and the button information also toggles to show the shifted state display. Display mode Six types of display mode can be set according to the information to display. You can switch the mode using the display mode button assigned to the cross-point pad. The display can also be subdivided (top and bottom) to display two pieces of information. For details, see "Setting the Display" (page 409). c Cross-point indicators When lit, these indicate the logical V/K pair color linked to the logical V/K pair assigned to buttons on the 3rd row. If a signal cannot be selected, because a signal is not assigned or the inhibit setting is set, the indicator is not lit. You can disable the cross-point indicators so that they do not turn on. For details, see "Setting the on/off state of cross-point indicators" (page 409). Note In router operation mode, cross-point indicators are not used. d Cross-point pad (assignable buttons) You can assign functions, such as settings and operations, of the cross-point button rows in the Home > Setup > Panel > Xpt Module > Xpt Pad Button Assign menu (19104.36). You can configure up to 14 pages (page 1 to page 14) of settings, where each page contains functions assigned to the 15 cross-point pad buttons as a group. For details about assigning buttons, see "Setting a CrossPoint Pad" (page 410). 43