Sony MLS-X1 Users Guide - Page 230

3 Press the [Select Source] button. A source selection window appears. 4 Switch the source using the source selection buttons. Select a tab to change the button number to display. Setting a source selection button to the on state switches the source. Selecting a level Select using the [LEVEL BTN1] button to [LEVEL BTN4] button assigned to the cross-point pad. Router Operations (AUX Bus Control Block) Press the [RTR MODE] button on the cross-point pad in the AUX bus control block, turning it on, to switch to router operation mode. You can select destinations and sources and perform other operations using the AUX bus control block in router operation mode. For details about assigning destinations, sources, and levels, see "Setting a Router" (page 415). Selecting a destination and source Select a destination using the 1st row and 2nd delegation buttons in the AUX bus control block (router operation mode) and select a source using the 3rd row and 4th row cross-point buttons. The delegation button rows/cross-point button rows may have different operation modes depending on whether second delegation mode is enabled/disabled. The delegation button row/cross-point button row operations are the same as on the AUX bus control block (AUX bus operation mode). For details, see "Operation Mode of a Button Row" (page 87) and "AUX bus control block" (page 89). Note The operation mode of the [SHIFT] button in delegation button rows/cross-point button rows in the AUX bus control block (router operation mode) is set in the Home > Setup > Panel > Router > Delegation Button Assign menu (19104.51) and Home > Setup > Panel > Router > Source Table Assign menu (19104.52). For details about setting delegation button rows, see "Setting the operation mode of the shift button" (page 415). For details about setting cross-point button rows, see "Setting the operation mode of the shift button" (page 416). 230