Sony MLS-X1 Users Guide - Page 132
Setting a Zabton, Setting the key delay mode, Setting a zabton pattern
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
To set to key drop off mode, set the [Key Drop] button to the off state. 3 Set 8H mode/4H mode using the [8H Mode] button. On: 8H mode Move the key fill/key source position downward by eight lines. Off: 4H mode Move the key fill/key source position downward by four lines. Setting the key delay mode When frame delay mode is enabled, key drop is set to key drop off mode (fixed) regardless of the key edge settings. Notes • The resizer function is used in frame delay mode. Frame delay mode is enabled only when the conditions for use of the resizer are satisfied. • When using dual resizer effects, frame delay mode is disabled on the two target keys. • When frame delay mode is enabled, the video has a one-frame delay. 1 Open the Home > M/E-1 > Key1 > Edge > Edge Type Select menu (11101.21). 2 Enable/disable frame delay mode using the [Frame Delay] button in the [Key Delay Mode] group. On: Enable frame delay mode. Off: Disable frame delay mode. Setting a Zabton This section describes the M/E-1 key 1 menu as an example. Note When the edge type is emboss, a zabton cannot be set. 1 Open the Home > M/E-1 > Key1 > Edge > Edge Type Select menu (11101.21). 2 Set the [Zabton] button to the on state and set the following parameters. No. Parameter 1 Size 2 Soft 3 Density Adjustment Pattern size Softness of the pattern contour Density Setting a zabton pattern 1 Open the Home > M/E-1 > Key1 > Edge > Zabton Adjust menu (11101.23). 2 In the [Zabton Pattern] group, select a zabton pattern. Key Wipe: Pattern for key wipe pattern key Key Edge Pattern: Pattern for key edge color mix Mask Pattern: Pattern for main mask source 3 Press the [Pattern Select] button. A pattern selection window appears. 4 Set the button for the target pattern to the on state. 5 Press [OK]. 6 Press the [Zabton Color] button and set the zabton color using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue 4 Density Adjustment Luminance Saturation Hue Density To set modifiers for a zabton pattern Pattern for key wipe pattern key: Press the [Pattern Adjust] button, open the Home > M/E-1 > Key1 > Transition > Wipe menu (11101.52), and set modifiers. For details about setting modifiers, see "Setting Independent Key Transition Wipe Modifiers" (page 158). Pattern for key edge color mix: Press the [Pattern Adjust] button, open the Home > M/E-1 > Key1 > Edge > Matte Adjust menu (11101.22), and set modifiers. For details about setting modifiers, see "To set modifiers for a color mix pattern" (page 126). Pattern for main mask source: Press the [Pattern Adjust] button, open the Home > M/E-1 > Key1 > Mask menu (11101.31), and set modifiers. For details about setting modifiers, see "To set modifiers for a mask pattern" (page 133). 132