Sony MLS-X1 Users Guide - Page 125
Key Fill and Key Source, Selecting Signals Menu
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Key Fill and Key Source Selecting Signals (Menu) Set the signals to insert in the key fill and key source. This section describes the M/E-1 key 1 menu as an example. Setting a key fill/key source 1 Open the Home > M/E-1 > Key1 > Type > Type Select menu (11101.11). 2 In the [Key Fill] group, set the key fill signal. Key Bus: Key 1 bus signal For details about selecting a signal, see "Selecting a Key Fill Signal/Key Source Signal" (page 91). Matte: Color matte When the [Matte] button is selected, set the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue 3 In the [Key Source] group, set the key source signal. Self: Self mode Select the same signal as the key fill bus. Auto Select: Auto Select mode Select the signal assigned in pair with the key fill bus signal. Split: Split mode Select a different signal than the key fill bus pair signal. When the [Split] button is selected, select a key source signal. For details about selecting a signal, see "Selecting a Key Fill Signal/Key Source Signal" (page 91) and "Selecting a Video Signal/Key Signal" (page 91). Setting a key fill color mix To mix color 1 and color 2 color mattes When color matte is selected for a key fill, you can use a wipe pattern or dedicated pattern to mix color 1 and color 2. 1 Open the Home > M/E-1 > Key1 > Type > Matte Adjust menu (11101.13). 2 Set the [Mix Color] button in the [Fill Matte] group to the on state and set the following parameters. No. Parameter 1 Size 2 Soft Adjustment Pattern size Softness of the pattern contour To set a single color, set the [Flat Color] button to the on state. Note The [Flat Color] button parameters are shared with the [Matte] button parameters in the [Key Fill] group in the Home > M/E-1 > Key1 > Type > Type Select menu (11101.11). 3 In the [Mix Pattern] group, select a mix pattern for the color mix. Key Wipe: Use a wipe pattern selected for an independent key transition. Key Edge Pattern: Use a dedicated pattern. When the [Key Edge Pattern] button is selected, press the [Pattern Select] button. In the pattern selection window, set the button for the target pattern to the on state and press [OK]. Note Dedicated patterns 1 to 24 are the same as standard wipe patterns 1 to 24. 4 Press the [Color 1] button and set color 1 using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue Note The [Color 1] button parameters are shared with the [Matte] button parameters in the [Key Fill] group in the Home > M/E-1 > Key1 > Type > Type Select menu (11101.11). 5 Press the [Color 2] button and set color 2 using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue 125