Sony MLS-X1 Users Guide - Page 91
Selecting a Key Fill Signal/Key, Source Signal, Selecting a Video Signal/Key Signal
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
• [XPTHLD B] button: Cross-point hold for the background B bus • [XPTHLD UTL2] button: Cross-point hold for the utility 2 bus. Key bus cross-point hold For a key bus, the cross-point hold operation mode specified in the Home > Setup > Switcher > Custom > Key/Wipe menu (19103.43) is applied. The following three operation modes can be set. Key disable: Mode which maintains cross-point selection state and key settings information Key disable (including key state): Mode which maintains cross-point selection state, key setting information, and the key inserted/removed (on/off) state Cross-point hold: Mode which maintains cross-point selection state only For details, see "Setting the Cross-Point Hold Operation Mode" (page 396). Bus override This function allows you to temporarily set cross-point hold for specific cross-point buttons only. It is enabled for background A bus and background B bus cross-point buttons only. When you press and hold a cross-point button and recall a snapshot, the cross-point selection state is maintained for the pressed button only. The cross-point selection state is maintained while the button is pressed, even when executing an effect timeline. Selecting a Key Fill Signal/Key Source Signal You can select a key fill signal and key source signal using the following methods. To select a key fill signal • Press a cross-point button in the cross-point button row assigned with the key bus. • In key bus mode and free assign mode, press and hold a key bus delegation button in the cross-point pad/ function button section and press a cross-point button in the 1st row. • In key/AUX bus delegation mode, press a key bus delegation button in the 1st row and press a cross-point button in the 2nd row. • On the Flexi Pad control block in key operation mode, press and hold a key delegation button in the memory recall section and press a cross-point button in the 1st row in the cross-point control block. • In key bus mode and free assign mode, press and hold the [SPLT] button in the key control block and press a cross-point button in the 1st row of the cross-point control block. • Press a cross-point button in the cross-point button row assigned with the key fill bus in the AUX bus control block (AUX bus operation mode). To select a key source signal • In key bus mode and free assign mode, press and hold a key bus delegation button in the cross-point pad/ function button section and press a cross-point button in the 2nd row. • In key/AUX bus delegation mode, press and hold a key bus delegation button in the 1st row and press a crosspoint button in the 2nd row. • On the Flexi Pad control block in key operation mode, press and hold a key delegation button in the memory recall section and press a cross-point button in the 2nd row in the cross-point control block. • Press and hold the [SPLT] button in the key control block and press a cross-point button in the 2nd row of the cross-point control block. • Press a cross-point button in the cross-point button row assigned with the key source bus in the AUX bus control block (AUX bus operation mode). Notes • You can also select a key fill signal/key source signal in the menu. For details, see "Selecting the key fill/key source signals" (page 126). • You can also select a signal paired with a key fill signal or select the key fill signal itself as the key source signal automatically. For details, see "Setting a key fill/key source" (page 125) and "Setting a key fill/key source" (page 126). Selecting a Video Signal/Key Signal You can select the video signal or the key signal of a V/K pair using the [KEY] button assigned to the cross-point pad/function button section. When a cross-point button is pressed while pressing the [KEY] button, the key signal is selected. When a crosspoint button is pressed without pressing the [KEY] button, the video signal is selected. Information for the key signal or video signal, whichever is selected, appears on the display on the cross-point control block/AUX bus control block (AUX bus operation mode). Notes • The [KEY] button cannot be used when a cross-point control block is set to key bus mode. • The [KEY] button cannot be used on the following buses. - Key fill bus (only the video signal is selectable) 91