Sony MLS-X1 Users Guide - Page 418
PVW] button in the transition control, Setting the operation mode of the [TRANS
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 418 highlights
Setting the operation when an auto transition execution button is pressed during an auto transition ICP-X7000 configuration Note Enabled using the [AUTO TRANS] button in the transition control block, independent key transition control block, and key fader control block, and the [TAKE] button in the transition control block (simple type). 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Auto Trans/Take] group, select an operation mode. Continue: Continue the transition. Cancel: Cancel the transition and return to the previous state before executing the transition. ICP-X1000 series configuration Note Enabled using the [AUTO TRANS] button and a [KEY1 TRANS] to [KEY8 TRANS] button in the transition control block. 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Auto Trans] group, select an operation mode. Continue: Continue the transition. Cancel: Cancel the transition and return to the previous state before executing the transition. Setting the next transitions to select using the [ALL] button in the transition control block 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Next Trans All] group, select a button to include for the next transition. You can select multiple buttons. Bkgd: [BKGD] button Key Priority: [KEY PRIOR] button Key1 to Key8: [KEY1] button to [KEY8] button Enabling double-press for the [BKGD] button in the transition control block When double-press is enabled, pressing the [BKGD] button twice in quick succession selects all currently inserted keys and removes them in the next transition. 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Bkgd Trans Btn Double Click] group, select whether to enable/disable the double-press function. Disable: Disable button double-press. Enable: Enable button double-press. Setting the operation mode of the [TRANS PVW] button in the transition control block 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Trans PVW] group, select an operation mode. Hold: Enables transition preview mode only while the [TRANS PVW] button is pressed. Lock: Pressing the [TRANS PVW] button switches between setting and releasing transition preview mode each time the button is pressed. Swapping the [AUTO TRANS] button and [CUT] button in the transition control block 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 Press the [Auto Trans/Cut Swap] button. On: Swap the [AUTO TRANS] button and [CUT] button. Off: Do not swap the [AUTO TRANS] button and [CUT] button. Setting the transition indicator display in non-sync state 1 Open the Home > Setup > Panel > Custom > Operation Mode menu (19104.61). 2 In the [Non Sync Fader Indicator] group, select a display mode. Normal: The transition indicator is lit when in nonsync state. 418