Sony MLS-X1 Users Guide - Page 127

No. Parameter 1 LUM 2 SAT 3 HUE Adjustment Luminance Saturation Hue When mix is selected, set the following parameters. No. Parameter 1-1 LUM 1-2 SAT 1-3 HUE 1-4 SIZE 1-5 SOFT 2-1 LUM 2-2 SAT 2-3 HUE 2-4 SIZE 2-5 SOFT Adjustment Color 1 luminance Color 1 saturation Color 1 hue Pattern size Softness of the pattern contour Color 2 luminance Color 2 saturation Color 2 hue Pattern size Softness of the pattern contour To set a key fill bus signal Press the [MAT FILL] button, turning it off. For details about selecting a signal, see "Selecting a Key Fill Signal/Key Source Signal" (page 91). 2 Set the key source signal using the [AUTO SEL] button/[SPLT] button. To set the same signal as the key fill bus (self mode) Press the [AUTO SEL] button and [SPLT] button simultaneously, turning them off. To set the signal assigned in pair with the key fill bus signal (auto select mode) Press the [AUTO SEL] button, turning it on. To set a different signal than the key fill bus pair signal (split mode) Press the [SPLT] button, turning it on. For details about selecting a signal, see "Selecting a Key Fill Signal/Key Source Signal" (page 91). Selecting SL Key Content You can load content into an SL key to use as a key fill/ key source. You can select still image content in which a video signal and key signal have been combined as a key fill/key source. For details about content operations, see "Content Operations" (page 348). This section describes the M/E-1 key 5 menu as an example. Note Content loading and unloading operations are common to the key 5 to key 8 menus. Content cannot be loaded/ unloaded individually for each key. Loading content You can load content into SL key memory from content storage. Note If the system signal format is different than the image size, the following processing occurs with the origin at the top left of the image. - If an image size is smaller, the missing part is filled with black. - If an image size is larger, the excess part is cropped and removed. Even when image size processing occurs, the thumbnail image is not changed. 1 Open the Home > M/E-1 > Key5 > SL Key > Load menu (11105.61). Content can be displayed in list view or thumbnail view. To change content properties Press the [Edit Properties] button and edit the properties in the [Edit Properties] window. For details, see "Editing Content Properties" (page 352). 2 Select content to load. To select and load multiple content, place a check mark beside the target content to load. To select and load all content, place a check mark in the Select All checkbox. 3 Press the [Load to Memory] button. 4 Check the message, then press [OK]. Unloading content You can unload content from SL key memory. 1 Open the Home > M/E-1 > Key5 > SL Key > Unload menu (11105.62). Content can be displayed in list view or thumbnail view. 127