Sony MLS-X1 Users Guide - Page 403

For a Flexi Pad control block, transition control block, transition control block (simple type), independent key transition control block Select the target switcher bank to set. In the [Select Bank] group, place a check mark for the switcher bank to select. By default, the switcher bank where the selected control block is located in the full view is selected. You can also select multiple switcher banks and set assignable buttons simultaneously. Notes • When multiple switcher banks are selected, the last selected switcher bank becomes the reference and is displayed highlighted. The button names configured on the reference switcher bank are displayed on the assignable buttons. When the reference switcher bank is deselected, the reference will be set according to the following order of priority. M/E-1 > M/E-2 > M/E-3 > M/E-4 > M/E-5 > P/P • In multi program 2 mode, main and sub can be set separately. When a switcher bank is set to shared main and sub, the assignable button assignments are also shared. 3 Press the target assignable button to set. The [Select Function] window appears. The functions that can be assigned to the selected button are displayed in the [Select Function] window. For Flexi Pad control block Select a tab to change the function to display. [Mode / Others] tab: Mode selection button/ operation button [Bank] tab: Bank selection buttons For an independent key transition control block Select a tab to change the function to display. [Current] tab: Keys of the switcher bank where the selected control block is located [Other banks] tab: Keys of the switcher banks other than the switcher bank where the selected control block is located 4 Set the button for the function to assign to the on state. To release a function assignment Set the [No Assign] button to the on state. 5 Press [OK]. To set the fader lever in a key fader control block You can set the key which is the target of fader lever operation. Press the button at the bottom of the fader lever to display the [Select Function] window. Set the button for the target key to the on state and press [OK]. All: Enable operation for all four keys assigned to key delegation buttons. Disable: Disable fader lever operation. Key delegation 1: Enable operation for the key assigned to key delegation button 1. Key delegation 2: Enable operation for the key assigned to key delegation button 2. Key delegation 3: Enable operation for the key assigned to key delegation button 3. Key delegation 4: Enable operation for the key assigned to key delegation button 4. Note The name of the keys assigned to the key delegation buttons are displayed for key delegation 1 to 4 above. To return assignable button assignments to the defaults Press the [Default Recall] button, check the message, then press [OK]. The assignable button assignments and fader lever settings return to the defaults. Assigning regions to a region selection button in the numeric keypad control block You can assign up to four regions to each region selection button. When multiple regions are assigned, the region name set for the lowest number is displayed on the region selection button. 1 Open the Home > Setup > Panel > Module > Button Assign menu (19104.21). 2 Press within the white frame of the target numeric keypad control block to set. An enlarged image of the numeric keypad control block appears. 3 Press the target assignable button to set. The [Select Function] window for selecting a region number appears. 4 Press the [Edit] button for the target region number (1 to 4) to set. The [Select Function] window for selecting a region appears. Select a tab to change the region to display. [ME/DME] tab: Switcher bank and DME regions [Dev/Macro] tab: External device and macro regions [User] tab: User regions 403