Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1003

ip proxy-arp Enable proxy ARP on an interface. C9000 Series Syntax ip proxy-arp To disable proxy ARP, use the no ip proxy-arp command. Defaults Enabled. Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands show ip interface - displays the interface routing status and configuration. ip route Assign a static route to the switch. C9000 Series Syntax ip route {destination mask {ip-address | interface [slot/port] | [tunnel tunnel-id] [distance] | [permanent] | tag tag-value}}[vrf vrf-name ] To delete a specific static route, use the no ip route destination mask command. To delete all routes matching a certain route, use the no ip route destination mask command. IPv4 Routing 1003