Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1242

debug ip ospf Display debug information on OSPF. Entering the debug ip ospf commands enables OSPF debugging for the first OSPF process. C9000 Series Syntax debug ip ospf process-id [vrf vrf name][bfd |event | packet | spf | databasetimers] To cancel the debug command, use the no debug ip ospf command. Parameters process-id vrf name bfd event packet spf database-timers Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. Enter the keyword vrf to view debugging information on OSPF corresponding to that VRF. (OPTIONAL) Enter the keyword bfd to debug only OSPF BFD information. (OPTIONAL) Enter the keyword event to debug only OSPF event information. (OPTIONAL) Enter the keyword packet to debug only OSPF packet information. (OPTIONAL) Enter the keyword spf to display the Shortest Path First information. (OPTIONAL) Enter the keywords database-timers to display the LSA throttling timer information. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.4(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.8.0 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Added support for VRF on all platforms (Except MXL and STOMP). Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added the database-timer rate-limit option for the S4810. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following describes the debug ip ospf command shown in the Example below. Open Shortest Path First (OSPFv2 and OSPFv3) 1242