Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1631

Example Related Commands Field Line User Host(s) Location Description Displays the terminal lines currently in use. Displays the user name of all users logged in. Displays the terminal line status. Displays the IP address of the user. Dell#show users Authorization Mode: role or privilege Line 0 console 0 *3 vty 1 4 vty 2 User admin sec1 ml1 Role sysadmin secadmin netadmin Privilege Host(s) Location 15 idle 14 idle 172.31.1.4 12 idle 172.31.1.5 username - use to enter the user name. timeout login response Specify how long the software waits for the login input (for example, the user name and password) before timing out. C9000 Series Syntax timeout login response seconds To return to the default values, use the no timeout login response command. Parameters seconds Enter a number of seconds the software waits before logging you out. The range is: • VTY: the range is from 1 to 30 seconds, the default is 30 seconds. • Console: the range is from 1 to 300 seconds, the default is 0 seconds (no timeout). • AUX: the range is from 1 to 300 seconds, the default is 0 seconds (no timeout). Defaults See the defaults settings shown in Parameters. Command Modes LINE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Security 1631