Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1565

rmon event Add an event in the RMON event table. C9000 Series Syntax rmon event number [log] [trap community] [description string] [owner name] To disable RMON on an interface, use the no rmon event number [log] [trap community] [description string] command. Parameters number log trap community description string owner name Assign an event number in integer format from 1 to 65535. The number value must be unique in the RMON event table. (OPTIONAL) Enter the keyword log to generate an RMON log entry. The log entry is triggered and sets the eventType in the RMON MIB to log or log-and-trap. The default is No log. (OPTIONAL) Enter the keyword trap then an SNMP community string to configure the eventType setting in the RMON MIB. This keyword sets either snmptrap or log-and-trap. The default is public. (OPTIONAL) Enter the keyword description then a string describing the event. (OPTIONAL) Enter the keyword owner then the name of the owner of this event. Defaults As noted in the Parameters section. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Remote Monitoring (RMON) 1565