Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 622

EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.7(0.0) 9.3(0.0) Description Introduced on the C9010. Introduced on the S6000-ON. Introduced on the S6000 platform. Usage Information The following table describes the output fields displayed for the show running-config dcb-bufferthreshold command: Field Profile name Priority buffer-size pause-thresholdvalue resumethreshold-value Description Name of the DCB buffer threshold profile The priority of the queue for which the buffer space settings apply Ingress buffer size Buffer limit at which the port sends the pause to peer in KB. Buffer offset limit at which the port resumes the peer in KB. The following table describes the output fields displayed for the show interface pfc bufferthreshold command: Field queue Description Number of the queue lossless buffer-size pause-thresholdvalue resumethreshold-value Whether the queue is a lossy or lossless queue for which buffer threshold is configured Ingress buffer size Buffer limit at which the port sends the pause to peer in KB. Buffer offset limit at which the port resumes the peer in KB. shared threshold weight Weightage of the priorities on the shared buffer size in the system. Example Dell#show run buffer-threshold ! dcb-buffer-threshold test1 pfc priority 0 buffer-size 40 pfc priority 3 buffer-size 50 ! dcb-buffer-threshold test2 pfc priority 0 buffer-size 80 pause-threshold 50 ! Data Center Bridging (DCB) 622