Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1742

logging history Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured). C9000 Series Syntax logging history level To return to the default values, use the no logging history command. Parameters level Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 4 or warnings. Defaults warnings or 4 Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 Description Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information When you configure the snmp-server trap-source command, the system messages logged to the history table are also sent to the SNMP network management station. Related Commands show logging - displays information logged to the history buffer. logging history size Specify the number of messages stored in the logging history table. C9000 Series Syntax logging history size size To return to the default values, use the no logging history size command. Simple Network Management Protocol (SNMP) and Syslog 1742