Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1602

• username aaa authorization role-only Configure authentication to use the user's role only when determining if access to commands is permitted. C9000 Syntax aaa authorization role-only To return to the default setting, use the no aaa authentication role-only command. Parameters name inherit existingrole-name Enter a text string for the name of the user up to 63 characters. It cannot be one of the system defined roles (sysadmin, secadmin, netadmin, netoperator). Enter the inherit keyword then specify the system defined role to inherit permissions from (sysadmin, secadmin, netadmin, netoperator). Defaults none Command Modes CONFIGURATION Command History Version 9.9(0.0) 9.5(0.0) Description Introduced on the C9010. Introduced on the Z9000, S6000, S4820T, S4810, and MXL. Usage Information By default, access to commands are determined by the user's role (if defined) or by the user's privilege level. If the aaa authorization role-only command is enabled, then only the user's role is used. Before you enable role-based only AAA authorization: 1. Locally define a system administrator user role.This will give you access to login with full permissions even if network connectivity to remote authentication servers is not available. 2. Configure login authentication on the console. This ensures that all users are properly identified through authentication no matter the access point 3. Specify an authentication method (RADIUS, TACACS+, or Local). 4. Specify authorization method (RADIUS, TACACS+ or Local). 5. Verify the configuration has been applied to the console or VTY line. role Changes command permissions for roles. C9000 Syntax role mode { { { addrole | deleterole } role-name } | reset } command To delete access to a command, use the no role mode role-name Security 1602