Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 955

Internet protocol processing disabled GigabitEthernet 0/7 is up, line protocol is down Internet protocol processing disabled GigabitEthernet 7/9 is up, line protocol is up Internet address is 10.87.5.250/24 IGMP is enabled on interface IGMP query interval is 60 seconds IGMP querier timeout is 120 seconds IGMP max query response time is 10 seconds IGMP last member query response interval is 1000 ms IGMP activity: 0 joins, 0 leaves IGMP querying router is 10.87.5.250 (this system) IGMP version is 2 show ip igmp ssm-map Display is a list of groups that are currently in the IGMP group table and contain SSM mapped sources. C9000 Series Syntax Parameters show ip igmp ssm-map [group] group (OPTIONAL) Enter the multicast group address in the form A.B.C.D to display the list of sources to which this group is mapped. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the C9010. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. Example Dell#show ip igmp ssm-map Interface Vlan 20 Group 232.1.1.5 Uptime 00:11:22 Expires Never Router mode INCLUDE Last reporter 35.0.0.2 Group source list Source address Expires 65.0.0.1 00:01:22 Internet Group Management Protocol (IGMP) 955