Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1336

Version 8.4.2.0 8.3.19.0 Description Introduced on the E-Series TeraScale. Introduced on the S4820T. Usage Information The show crypto ipsec sa ipv6 command output displays security associations set up for OSPFv3 links in IPsec authentication and encryption policies on the router. Example Table 5. show crypto ipsec sa ipv6 Command Description Field Description Interface IPv6 interface. Link local address IPv6 address of interface IPSecv6 policy name inbound/outbound ah inbound/outbound esp spi inbound/outbound esp spi transform in use settings replay detection support Name of the IPsec security policy applied to the interface. Authentication policy applied to inbound or outbound traffic. Encryption policy applied to inbound or outbound traffic. Security policy index number used to identify the policy. Encryption policy applied to inbound or outbound traffic. Security policy index number used to identify the policy. Security algorithm that is used to provide authentication, integrity, and confidentiality. Transform that the SA uses (only transport mode is supported). Y: An SA has enabled the replay detection feature. N: The replay detection feature is not enabled. STATUS ACTIVE: The authentication or encryption policy is enabled on the interface. Related Commands Example show crypto ipsec policy - displays the configuration of IPsec authentication and encryption policies. Dell#show crypto ipsec policy Dell#show crypto ipsec sa ipv6 Interface: TenGigabitEthernet 0/0 Link Local address: fe80::201:e8ff:fe40:4d10 IPSecv6 policy name: OSPFv3-1-500 inbound ah sas spi : 500 (0x1f4) transform : ah-md5-hmac in use settings : {Transport, } Open Shortest Path First (OSPFv2 and OSPFv3) 1336