Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 213

auto forceunauthorized Enter the keyword auto to authorize a port based on the 802.1X operation result. Enter the keywords force-unauthorized to forcibly deauthorize a port. Defaults none Command Modes INTERFACE INTERFACE (BATCH MODE) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.10(0.0) 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.11.1 7.6.1.0 7.4.1.0 Description Introduced the Configuration Terminal Batch mode on C9010. Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information The authenticator completes authentication only when port-control is set to auto. Use this command in Interface Batch Mode to enable port control on an interface in a dual-homing setup. dot1x profile Configure a dot1x profile to define a list of trusted supplicant MAC addresses. Syntax Parameters [no] dot1x profile profile-name profile-name Enter a dot1x profile-name. The profile name length is limited to 32 characters. Defaults None Command Modes CONFIGURATION CONFIGURATION TERMINAL BATCH Error Strings NONE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. 802.1X 213