Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 90

Version 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command Usage Information You cannot delete a terminal connection. Related Commands access-class - restricts the incoming connections to a particular IP address in an IP access control list (ACL). password - specifies a password for users on terminal lines. logging coredump server Configure the switch to move (upload) a core dump for an application or kernel crash to an external FTP server. C9000 Series Syntax Parameters logging coredump server {ipv4-address | ipv6-address} username name password [type] password {ipv4-address | ipv6-address} name type Enter the server IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X). Enter a username to access the target server. Enter the password type: • Enter 0 to enter an unencrypted password. • Enter 7 to enter a password that has already been encrypted using a Type 7 hashing algorithm. password Enter a password to access the target server. Defaults Core dumps for kernal and application crashes are stored in the local flash of the Control Processor CPU. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.0(1.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S5000. Control and Monitoring 90