Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 999

ip host Assign a name and IP address for the host-to-IP address mapping table. C9000 Series Syntax ip host name ip-address To remove an IP host, use the no ip host name [ip-address] command. Parameters name ip address Enter a text string to associate with one IP address. Enter an IP address, in dotted decimal format, to be mapped to the name. Defaults Not configured. Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced for the E-Series. ip max-frag-count Set the maximum number of fragments allowed in one packet for packet re-assembly. C9000 Series Syntax ip max-frag-count count To place no limit on the number of fragments allowed, use the no ip max-frag-count command. IPv4 Routing 999