Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 685

netbios-name-server Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients. C9000 Series Syntax Parameters netbios-name-server address [address2...address8] address Enter the address of the NETBIOS name server. You may enter up to eight, in order of preference. Defaults none Command Modes DHCP Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. netbios-node-type Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as hybrid. C9000 Series Syntax Parameters netbios-node-type type type Enter the NETBIOS node type: • Broadcast: Enter the keyword b-node. • Hybrid: Enter the keyword h-node. • Mixed: Enter the keyword m-node. • Peer-to-peer: Enter the keyword p-node. Defaults Hybrid Dynamic Host Configuration Protocol (DHCP) 685