Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1650

dot1x port-control Enable port control on an interface. C9000 Series Syntax Parameters dot1x port-control {force-authorized | auto | force-unauthorized} force-authorized auto forceunauthorized Enter the keywords force-authorized to forcibly authorize a port. Enter the keyword auto to authorize a port based on the 802.1X operation result. Enter the keywords force-unauthorized to forcibly de-authorize a port. Defaults none Command Modes INTERFACE Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information The authenticator performs authentication only when port-control is set to auto. dot1x quiet-period Set the number of seconds that the authenticator remains quiet after a failed authentication with a client. C9000 Series Syntax dot1x quiet-period seconds To disable quiet time, use the no dot1x quiet-time command. Parameters seconds Enter the number of seconds. The range is from 1 to 65535. The default is 30. Security 1650