Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 62

Version 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original Command Usage Information After entering the banner exec command, type one or more spaces and a delineator character. Enter the banner text then the second delineator character. When you connect to the router, if a message of the day banner is configured, it displays first. If no message of the day banner is configured, the login banner and prompt appear. After logged in, the EXEC banner (if configured) displays. Example Dell(conf)#banner exec ? LINE c banner-text c, where 'c' is a delimiting character Dell(conf)#banner exec % Enter TEXT message. End with the character '%'. This is the banner% Dell(conf)#end Dell#exit 4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on line console This is the banner Dell Networking OS con0 now available Press RETURN to get started. 4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line console This is the banner Dell> Related Commands line - enables and configures the console and virtual terminal lines to the system. banner login Set a banner to display when logging on to the system. C9000 Series Syntax Parameters banner login {acknowledgement | keyboard-interactive | no keyboard-interactive} [c line c] keyboardinteractive acknowledgemen t c Enter the keyword keyboard-interactive to require a carriage return (CR) to get the message banner prompt. Enter the acknowledgement keyword to require a positive acknowledgement from the user while logging in to the system. Enter a delineator character to specify the limits of the text banner. The delineator is a percent character (%). Control and Monitoring 62