Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1028

----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Te 1/2 1/0 3d2h show ip route list Display IP routes in an IP prefix list. C9000 Series Syntax Parameters show ip route list prefix-list prefix-list Enter the name of a configured prefix list. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Example Dell#show ip route list test Codes:C- connected, S - static, R - RIP, B- BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2- OSPF NSSA external type 2, E1 - OSPF external type 1, E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default, >- non-active route, + - summary route Gateway of last resort is not set Destination Gateway Dist/Metric Last Change R 2.1.0.0/24 via 2.1.4.1, Te 2/43 120/2 3d0h R 2.1.1.0/24 via 2.1.4.1, Te 2/43 120/2 3d1h R 2.1.2.0/24 via 2.1.4.1, Te 2/43 120/1 3d0h IPv4 Routing 1028