Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1244

Example Field dr: bdr: Description Displays the IP address of the designated router. Displays the IP address of the Border Area Router. Dell#debug ip ospf 1 packet OSPF process 90, packet debugging is on Dell# 08:14:24 : OSPF(100:00): Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1 aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Te 1/3 dst:224.0.0.5 netmask:255.255.255.0 pri:1 N-, MC-, E+, T-, hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0 default-information originate To generate a default external route into an OSPF routing domain, configure the system. C9000 Series Syntax default-information originate [always] [metric metric-value] [metric-type typevalue] [route-map map-name] To return to the default values, use the no default-information originate command. Parameters always metric metricvalue (OPTIONAL) Enter the keyword always to specify that default route information must always be advertised. (OPTIONAL) Enter the keyword metric then a number to configure a metric value for the route. The range is from 1 to 16777214. metric-type type- (OPTIONAL) Enter the keywords metric-type then an OSPF link state type of 1 value or 2 for default routes. The values are: • 1 = Type 1 external route • 2 = Type 2 external route route-map map- (OPTIONAL) Enter the keywords route-map then the name of an established name route map. Defaults Disabled. Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Open Shortest Path First (OSPFv2 and OSPFv3) 1244