Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1247

ip-address mask prefix-list-name (OPTIONAL) Enter a router ID in the dotted decimal format. If you enter a router ID, include the mask for that router address. (OPTIONAL) Enter a mask in dotted decimal format or /n format. (OPTIONAL) Enter the name of an IP standard prefix list, up to 140 characters. Defaults 110 Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. distance ospf Configure an OSPF distance metric for different types of routes. C9000 Series Syntax distance ospf [external dist3] [inter-area dist2] [intra-area dist1] To delete these settings, use the no distance ospf command. Parameters Defaults external dist3 inter-area dist2 intra-area dist1 (OPTIONAL) Enter the keyword external then a number to specify a distance for external type 5 and 7 routes. The range is from 1 to 255. The default is 110. (OPTIONAL) Enter the keywords inter-area then a number to specify a distance metric for routes between areas. The range is from 1 to 255. The default is 110. (OPTIONAL) Enter the keywords intra-area then a number to specify a distance metric for all routes within an area. The range is from 1 to 255. The default is 110. • external dist3 = 110 • inter-area dist2 = 110 Open Shortest Path First (OSPFv2 and OSPFv3) 1247