Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 766

redundancy reset-counter Reset failover counter and timestamp information displayed in the show redundancy command output. C9000 Series Syntax Parameters redundancy reset-counter pe pe-id pe pe-id Enter the keyword pe and the port extender ID to reset the counter. Range is from 0 to 255. Default Not configured. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 Description Introduced on the C9010. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the E-Series. Example Dell#redundancy reset-counter pe 1 redundancy synchronize Manually synchronize data between the RPMs and PEs at any time. C9000 Series Syntax Parameters redundancy synchronize [full] full Enter the keyword full to synchronize all data. Default Not configured. Command Modes EXEC Privilege High Availability (HA) 766