Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 643

clear hardware system-flow Clear system-flow statistics from a specified line card. C9000 Series Syntax Parameters clear hardware system-flow {cp-switch | linecard slot-id | pe pe-id stack-unit unit-number} [port-set port-pipe counters] linecard slot-id pe pe-id Enter the linecard slot-id parameters to identify the line card on which you want to clear system-flow statistics. The range of slot IDs is from 0 to 11. Enter the pe pe-id parameters to specify the port extender ID for which you want to clear system-flow statistics. NOTE: The pe option is only visible when the extended bridge feature is enabled. stack-unit unitnumber Enter the stack-unit unit-number parameters to specify the stack-unit for which you want to clear system-flow statistics. port-set port-pipe counters Enter the keywords port-set along with a port-pipe number, then the keyword counters to clear the system-flow counters on the selected port-pipe. The range of port-pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1 and 2. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.0 8.3.7.0 7.8.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Related Commands show hardware - displays the data plane or management plane input and output statistics for a specified hardware component. remote-exec Debug and troubleshoot switch hardware using remote commands. WARNING: Use the remote-exec command only with the guidance of an engineer from Dell Networking Technical Support. Debugging and Diagnostics 643