Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 112

linecard pe pe-id pem stack-unit media thermal-sensors Enter the keyword linecard to view information on the linecard environment status. Enter the keyword pe and the port extender (PE) ID to display environment status for PE. The PE ID range is from 0 to 255. NOTE: The pe option is only available when the extended bridge feature is enabled. Enter the keyword pem to view only information on power entry modules. Enter the keyword stack-unit to view information on stack-unit. Enter the keyword media to view information on optical media transceivers. Enter the keyword thermal-sensors to display only temperatures and thresholds for the system and switching core, and port modules. Default Command Modes Display status information on all system components. • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.8(0.0) 9.7(0.0) 9.2(1.0) 9.0.2.0 9.0.0.0 8.3.19.0 8.3.12.0 8.3.11.1 7.8.1.0 Description Introduced on the C9010 and C1048P. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. The output of the show environment fan command for the S-Series is changed to display fan speeds instead of showing the fan status as up or down. Usage Information The following examples show the output of the show environment command. Example (all) show environment pe 4 -- Fan Status -- Unit Bay TrayStatus Fan0 Speed Fan1 Speed 0 0 up up 9056 up 9056 Speed in RPM -- Power Supplies -- Unit Bay Status Type FanStatus FanSpeed(rpm) 0 0 up AC NA NA Control and Monitoring 112