Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1737

Version 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.4.1.0 7.6.1.0 7.5.1.0 Description Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for IPv6. Introduced on the S-Series. Introduced on the C-Series. Usage Information Multiple logging servers of both IPv4 and/or IPv6 can be configured. Related Commands logging on - enables the logging asynchronously to logging buffer, console, Syslog server, and terminal lines. logging trap - enables logging to the Syslog server based on severity. logging buffered Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer. C9000 Series Syntax logging buffered [level] [size] To return to the default values, use the default logging buffered command. To disable logging stored to an internal buffer, use the no logging buffered command. Parameters level size (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging. (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages buffered depends on the size of each message. The range is from 40960 to 524288. The default is 40960 bytes. Defaults level = 7; size = 40960 bytes Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.2(1.0) Description Introduced on the Z9500. Simple Network Management Protocol (SNMP) and Syslog 1737