Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1030

Example Related Commands Column Heading Total 1388 active... Description Displays the number of active and non-active routes and the memory usage of those routes. If there are no routes configured in the system, this line does not appear. Dell>show ip route summary Route Source Active Routes Non-active Routes connected 17 0 static 3 0 ospf 100 1368 2 Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5 Total 1388 2 Total 1388 active route(s) using 222440 bytes Total 2 non-active route(s) using 128 bytes Dell> show ip route - displays information about the routes found in the switch. show ip traffic View IP traffic statistics related to switch CPUs, including ICMP, UDP, TCP and ARP counters. C9000 Series Syntax Parameters show ip traffic {all | cp | rp} all (OPTIONAL) Enter the keyword all to view IP traffic statistics from all processors. cp (OPTIONAL) Enter the keyword cp to view only IP traffic statistics from the Control Processor. rp (OPTIONAL) Enter the keyword rp to view only IP traffic statistics from the Route Processor. Default View IP traffic statistics from all processors. Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. IPv4 Routing 1030