Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1140

the stack-unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48. • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet then the slot/port information. all events packet brief detail tx rx both (OPTIONAL) Enter the keyword all to display information on all interfaces. (OPTIONAL) Enter the keyword events to display major events such as timer events. (OPTIONAL) Enter the keyword packet to display information regarding packets coming in or going out. (OPTIONAL) Enter the keyword brief to display brief packet information. (OPTIONAL) Enter the keyword detail to display detailed packet information. (OPTIONAL) Enter the keyword tx to display transmit-only packet information. (OPTIONAL) Enter the keyword rx to display receive-only packet information. (OPTIONAL) Enter the keyword both to display both receive and transmit packet information. Defaults none Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.5.1.0 8.3.7.0 7.7.1.0 7.6.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. disable Enable or disable LLDP. C9000 Series Syntax disable Link Layer Discovery Protocol (LLDP) 1140