Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 970

management crypto-policy Apply the crypto policy to management traffic. C9000 Series Syntax management crypto-policy name To remove the management traffic crypto policy, use the no management crypto-policy name command. Parameters name Enter the name for the crypto policy.. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.2(0.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S4810, and S4820T. match Apply a match filter to the crypto policy. C9000 Series Syntax match seq-num tcp [sourceip address | ipv6 address {mask} {source-port number}] [destination ip address | ipv6 address {mask} {destination-port number}] To remove the match filter for the crypto map, use the no match seq-num tcp [source ip address | ipv6 address {mask} {source-port number}] [destination ip address | ipv6 address {mask} {destination-port number}] command. Parameters seq-num sourceip-address | ipv6 address mask source-port number Enter the match command sequence number. Enter the keyword source then the IPv4 or IPv6 address for the source. Enter the mask prefix length in /nn format. Enter the source port number. Internet Protocol Security (IPSec) 970