Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1501

Example threshold, packets are dropped based on the drop probability. This behavior is the identical treatment a packet receives when WRED is enabled without ECN configured on the router. Dell(conf)#service-class wred ecn 0, 3-5, 7 backplane show qos dot1p-queue-mapping Displays the dot1p priority to queue mapping on the switch. C9000 Series Syntax Defaults show qos dot1p-queue-mapping • dot1p Priority: 0 1 2 3 4 5 6 7 • Queue: 0 0 0 1 2 3 3 3 Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.12.0 8.3.16.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module. Related Commands service-class dot1p-mapping - Identifies the class map. Per-Port QoS Commands Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis. dot1p-priority Assign a value to the IEEE 802.1p bits on the traffic this interface receives. C9000 Series Syntax dot1p-priority priority-value Quality of Service (QoS) 1501