Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1143

mode To receive or transmit, set LLDP. C9000 Series Syntax mode {tx | rx} To return to the default, use the no mode {tx | rx} command. Parameters tx rx Enter the keyword tx to set the mode to transmit. Enter the keyword rx to set the mode to receive. Defaults Both transmit and receive. Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp) Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 7.6.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands protocol lldp (Configuration) - enables LLDP globally. show lldp neighbors - displays the LLDP neighbors. multiplier Set the number of consecutive misses before LLDP declares the interface dead. C9000 Series Syntax multiplier integer Link Layer Discovery Protocol (LLDP) 1143