Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1236

Parameters area-id cost Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. Specifies the stub area's advertised external route metric. The range is from zero (0) to 65535. Defaults cost = 1; no areas are configured. Command Modes ROUTER OSPF Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information In the Dell Networking operating software, cost is defined as reference bandwidth/bandwidth. Related Commands area stub - creates a stub area. area nssa Specify an area as a not so stubby area (NSSA). C9000 Series Syntax area area-id nssa [default-information-originate] [no-redistribution] [nosummary] To delete an NSSA, use the no area area-id nssa command. Parameters area-id no-redistribution Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. (OPTIONAL) Specify that the redistribute command does not distribute routes into the NSSA. Only use this command in an NSSA area border router (ABR). Open Shortest Path First (OSPFv2 and OSPFv3) 1236