Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1124

Example Related Commands Field Interval State Description Displays the interval between FEFD packets. Displays the state of the interface and can be one of the following: • bi-directional (interface is up, connected and hearing neighbor's echoes). • err-disabled (only found when FEFD mode is aggressive and when the interface has not hearing its neighbor's echoes for three times the message interval. To reset an interface in this state, use the fefd reset command.) • unknown (only found when FEFD mode is normal. • locally disabled (interface contains the fefd reset command in its configuration). • Admin Shutdown (interface is disabled with the shutdown command). Dell#sh fefd FEFD is globally 'ON', interval is 10 seconds, mode is 'Aggressive'. INTERFACE MODE Te 1/0 Te 1/1 Te 1/2 Te 1/3 Te 1/4 Te 1/5 Te 1/6 Te 1/7 Te 1/8 Te 1/9 Te 1/10 Te 1/11 Dell# Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive NA Aggressive INTERVAL (second) 10 10 10 10 10 10 10 10 10 10 NA 10 STATE Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Locally disabled Err-disabled • fefd - enables far-end failure detection. • fefd disable - disables FEFD on an interface only. • fefd-global - enables FEFD globally on the system. • fefd reset - resets all interfaces or a single interface that was in "error-disabled" mode. Layer 2 1124